Insulation: Technical Information
Listed below is technical information on materials that are used for insulation Cross-linked polyolefin foam: The firm cross-linked foam structure in a cross-linked polyolefin foam allows for excellent compression resistance. Polyolefin foam is also resistant to fungi and UV. The minimum service temperature for this material is -80°C and maximum is +100° C. Some general…
ClickClad: Elbows and Radius
90 ELBOW COVER BEFORE INSULATION : R- VALUE* 1. R-value of ClickClad 90 degree elbow cover is smaller length between A and B
ClickClad: Pipe Sizes
1. Accurate measurements of pipe size OD, the pipe type, insulation wall thickness and the type of insulation being used are required
ClickClad: Flange & Valve Cover
1. There are 3 simple shapes available Cylinder, Flat Top and Box for flange and valve covers.
Cootamundra Aquatic Centre
ClickClad was commissioned to supply and install the cladding to all exposed pipe work connected to solar system servicing the Cootamundra aquatic facility.
HVAC Commercial and Residential Complex
J&J Metro Air Conditioning commissioned ClickClad to supply and install all insulation with aluminium colour bonded cladding.
Mossvale Aquatic Sports Centre
ClickClad was commissioned to design and install a highly efficient and effective solar heating system for two swimming pools and a recreational shower with changing room facilities at the Mossvale Aquatic Sports Centre.
Industrial Plant Room
ClickClad’s versatile system is easily integrated into any sized plant room. A simple and intuitive system that is easy to assemble and refit is also highly resistant to corrosion and cracking.